# **Default configuration file** *default.intg* as generated by T-UGOm-GUI: ```latex % Keyword input file for tUGOm 2.0 and later. The suggested suffix is .intg % % Sections started with # % % Within sections the form is = value(s) optional comments % [on one line]. At least 1 space is needed each side of the "=". % % The order of the sections and the order of the keywords within % sections does not matter, but there can only be one of each % type of section and data must be specfic to that section. % % Extra characters to the right of the input value(s) are ignored. % % Lines beginning with "%" are copied directly to the echo file % in the section where they occur in input and are ignored % for input. % % With the exception of the #model section, no other section has to % appear in this input file. % % At least one type of forcing needs to be specified. % % Lines which have defaults identified can be excluded if the % defaults match your desired run parameters. % ``` ``` #version revision = Mercurial revision 3660:fcaf45d58831 of 2025-10-09 11:44 +0200 //T-UGOm revision number (at latest tugo or gui file processing) branch = Mercurial branch default //T-UGOm branch name (at latest tugo or gui file processing) ## #model rootname = NONE //Path of grid file time_step = NONE //time step sub_time_step = $TimeStep/3.0 //sub time step nSubCycles = 1 //some comments time_origine = 1950-01-01 00:00:00 //time origine mesh_format = nei //mesh format mesh_type = TRIANGULAR //mesh type mesh_meta = NONE //input-output var names for when mesh_type=STRUCTURED mesh_file = $rootname.$MeshType //Alternative path of grid file (only for when mesh_format=nei) mesh_proj4 = NONE //proj4 parameters for cartesian grids bel_file = NONE //bel file run_duration = 48.0 //run duration in hours spin_up = 48.0 //spin up spin_up_mode = LINEAR //spin up mode cold_start_ssh = NONE //cold start SSH filename restart_file = COLD-START //start condition Or filename restart_format = NETCDF //Type of the file used for restart ContinuationFlag = DISABLED //enable/disable rolling continuation files (and associated ASCII snapshots) production continuation_file = tugo_restart //Restart files rootname continuation_format = NETCDF //Restart file format continuation_interval = 10800.0 //Restart interval automatic_interval = MONTHLY //Restart interval output_path = . //default pathname for model outputs solver_type = SpDOMESTIC //Solver Type sub_solver_type = AUTO //Solver Type auxilliary_solver_type = AUTO //Solver Type SolverShowPerfs = 0 //#tics for linear solver performance display solver_mode = AUTO //Solver mode mode = 2D //simulation mode compressibility = BOUSSINESQ //compressibility mode pressure_mode = HYDROSTATIC //pressure mode wetting_drying = DISABLED //wetting/dryinc capabilities OPENMP_nCPUsMax = -1 //Max number of CPUs allowed in OPENMP optimisation ProcessPartitioning = TRUE //process partition using METIS executables UnpartitionedProcessing = COLLECTIVE //global informations processing PartitionBalancing = FALSE //process partition will try to balance extra-load due to sub-cycling ParallelMatrixDistribution = AUTO //matrix distribution in parallel solver ParallelRHSDistribution = AUTO //RHS distribution in parallel solver ParallelSolutionDistribution = AUTO //solution distribution in parallel solver MetisPath = /home/softs/metis-5.1.0/build/Linux-x86_64/programs/mpmetis //path to METIS partitioner (mpmetis -gtype=nodal) ArchivePartitionedMesh = FALSE //archive MPI partition mesh ArchiveMeshPartition = FALSE //archive mesh MPI partition PartitionMinElements = 2000 //minumum number of elements per partition 3d_pressure = FALSE //FLAG echo_file = tugo.echo //echo filename Stream_TMPDIR = AUTO //handle stream access mode ## #physics gravity_mode = CONSTANT //gravitational constant definition love_numbers_mode = CONSTANT //Love numbers mode anelastic_body_tide = FALSE //anelastic body tide flag linear_LSA_coefficient = 0.1 //linear LSA coefficient gravity_adjustment = NONE //gravitational constant adjustment coriolis_mode = LATITUDE-DEPENDANT //coriolis parameter definition coriolis_latitude = 0.0 //coriolis latitude minimum_cosine = 1.e-04 //minimum cosine(latitude) in dynamic equations water_viscosity = 1.0e-06 //water viscosity ## #dissipation min_background_speed = 0.05 //some comments background_velocity_mode = UNDEFINED //some comments BKG_polygones = NONE //some comments BKG_values = NONE //some comments background_velocity_file = NONE //some comments bottom_friction_type = QUADRATIC //some comments bottom_rugosity_file = NONE //prescribed z0 file, LGP1 discretisation linear_friction_coeff = 2.5e-3 //default linear bottom friction coefficient (r) quadratic_friction_coeff = 2.5e-3 //default quadratic bottom friction coefficient (Cd) QFC_polygones = NONE //some comments QFC_values = NONE //some comments roughness_length = 1.0e-4 //equivalent roughness length (z0) in quadratic bottom friction coefficient (Cd) computation min_quadratic_friction_coeff = -999 //minimum value for Cd when using roughness formulation QFCM_polygones = NONE //some comments QFCM_values = NONE //some comments bottom_coeff_file = NONE //prescribed Cd file, LGP1 discretisation rugosity_polygones = NONE //some comments rugosity_values = NONE //some comments rugosity_values_by_regions = NONE //some comments manning_coefficient = 1.e-02 //default Manning coefficient (n) manning_coefficient_file = NONE //prescribed Manning coefficient file, LGP1 discretisation localized_parameters_echoing = FALSE //some comments internal_drag_algorithm = 0 //some comments internal_drag_slope = 0.00 //some comments internal_drag_hmin = 300 //some comments internal_drag_hmax = 500 //some comments internal_drag_polygones = NONE //some comments internal_drag_values = NONE //some comments internal_drag_values_by_regions = NONE //some comments internal_drag_rugosity = 0.00 //some comments mixed_layer_coeff = 0.00 //some comments min_horizontal_viscosity = 1.00 //some comments max_horizontal_viscosity = 1000.00 //some comments smagorinsky_coefficient = 0.28 //some comments smagorinski_coefficient_polygons = NONE //some comments smagorinski_coefficient_values = NONE //some comments horizontal_viscosity_mode = SMAGORINSKY //some comments lateral_friction_type = LINEAR //some comments lateral_friction_linear_coeff = 1.0e-3 //some comments brunt_vassalla_value = 0.002 //some comments brunt_vassalla_file = NONE //some comments shear_drag_flag = FALSE //dissipation in mixing layer ## #dissipation3D min_background_speed = 0.05 //some comments BKG_polygones = NONE //some comments BKG_values = NONE //some comments background_velocity_file = NONE //some comments bottom_friction_type = QUADRATIC //some comments bottom_rugosity_file = NONE //prescribed z0 file, LGP1 discretisation linear_friction_coeff = 2.5e-3 //default linear bottom friction coefficient (r) quadratic_friction_coeff = 2.5e-3 //default quadratic bottom friction coefficient (Cd) QFC_polygones = NONE //some comments QFC_values = NONE //some comments roughness_length = 1.0e-4 //equivalent roughness length (z0) in quadratic bottom friction coefficient (Cd) computation min_quadratic_friction_coeff = -999 //minimum value for Cd when using roughness formulation QFCM_polygones = NONE //some comments QFCM_values = NONE //some comments bottom_coeff_file = NONE //prescribed Cd file, LGP1 discretisation rugosity_polygones = NONE //some comments rugosity_values = NONE //some comments rugosity_values_by_regions = NONE //some comments internal_drag_algorithm = 0 //some comments internal_drag_slope = 0.00 //some comments internal_drag_hmin = 300 //some comments internal_drag_hmax = 500 //some comments internal_drag_polygones = NONE //some comments internal_drag_values = NONE //some comments internal_drag_values_by_regions = NONE //some comments internal_drag_rugosity = 0.00 //some comments mixed_layer_coeff = 0.00 //some comments min_horizontal_viscosity = 1.00 //some comments max_horizontal_viscosity = 1000.00 //some comments smagorinsky_coefficient = 0.28 //some comments horizontal_viscosity_mode = SMAGORINSKY //some comments brunt_vassalla_value = 0.002 //some comments brunt_vassalla_file = NONE //some comments shear_drag_flag = FALSE //dissipation in mixing layer ## #tide tide_flag = FALSE //some comments AstronomicPotentialFlag = FALSE //enable/disable gravitational forcing LSA_flag = FALSE //enable/disable LSA forcing LSA_directory = NONE //pathname for LSA input files LSA_input_settings = file=XXX.nc format=NETCDF amplitude=XXX phaselag=XXX //LSA input file settings Atlas_directory = NONE //Tidal atlas pathname for online OBC computation Atlas_convention = NONE //ocean tides atlas filename template (such as WAVE.tide.nc) pressure_flag = FALSE //enable/disable atmospheric pressure forcing pressure_directory = NONE //pathname for atmospheric pressure input files pressure_input_setting = file=XXX.nc format=NETCDF amplitude=XXX phaselag=XXX //harmonic pressure input file settings pressure_elligibles = S2 S1 Sa //LSA input file settings horizontal_diffusion = FALSE //enable/disable spectral horizontal diffusion admittance = FALSE //enable/disable admittance spectrum extension equilibrium = FALSE //enable/disbale equilibrium tide onnline OBC computation nodal_correction = FALSE //enable/disable nodal corrections LSA_coeff = 0.0 //some comments tidal_BC = FALSE //enable/disable tidal boundary conditions BC_tide_file = NONE //tidal boundary conditions input file boundary_tide_interpolation = COMPLEX //tidal boundary conditions interpolation type spectral_solver = FALSE //enable/disable 2D-spectral tidal solver solver_type = SpDOMESTIC //spectral linear solver dominant_wave_1 = M2 //1st dominant wave for spectral solver dominant_wave_2 = K1 //2nd dominant wave for spectral solver prior_solution = NONE //prior solution for friction spectral_paire = DGP1xLGP2 //discretisation for spectral solver spectral_max_iteration = 10 //max iterations for dominant waves in spectral solver compound_max_iteration = 10 //max iterations for compound waves in spectral solver spectral_specific_data = FALSE //use discretisation-specific database for spectral solver spectral_topo_file = NONE //specific topography for spectral solver (u-discretisation compatible) spectral_slope_file = NONE //specific topography's slope for spectral solver (u-discretisation compatible) spectral_recycle = FALSE //recycle spectral solutions for tidal OBCs spectral_archive_level = STANDARD //spectral solutions archive extent spectral_archive_ascii = FALSE //spectral solutions ASCII archive spectral3D_solver = DISABLED //enable/disable 3D-spectral tidal solver spectral3D_max_reduced_modes = -1 //max number of modes in reduced solver spectral3D_max_analysed_modes = -1 //max number of modes in diagnostics spectral3D_OBCs = BAROTROPIC //OBCs spectral3D_OBCs_MaxModes = -1 //max. number of modes for radiationnal conditions radiational_OBCs_DispersionAdjustment = FALSE //adjust celerity to account for numerical dispersion spectral_density_advection = EXPLICIT //density advection mode spectral_density_relaxation = 0.0 //dspectral density relaxation frequency diffusion_duration = 72 //integration duration turbulence model diffusion_time_step = 120 //time step for turbulence model spectral3D_max_iteration = 10 //max iterations for dominant waves in 3D-spectral solver spectral3D_first_iteration = 0 //first iteration for dominant waves in 3D-spectral solver spectral3D_archive_level = STANDARD //spectral solutions archive content spectral3D_modal_analysis = STANDARD //spectral 3D solutions vertical modes analysis ## #atmosphere atmosphere_flag = FALSE //some comments pressure_flag = FALSE //some comments pressure_directory = AUTO //pathname for atmospheric pressure input files pressure_convention = AUTO //pressure forcing filename formatting pressure_variable = MSL //pressure variable pressure_equivalent_water_density = 1019.368 //pressure equivalent water density IB_equivalent_water_density = 1019.368 //IB equivalent water density wind_flag = FALSE //some comments uwind_variable = U10M //eastward u-wind variable vwind_variable = V10M //northward v-wind variable temperature_flag = FALSE //some comments surface_air_temperature = T2m //some comments surface_water_temperature = SST //some comments long_wave_radiation = FALSE //some comments short_wave_radiation = FALSE //some comments atmospheric_directory = NONE //some comments file_format = NETCDF //some comments file_endian = UNIX //some comments file_convention = NONE //atmospheric forcing file convention MaskFile = NONE //unused mask_variable = NONE //atmosphere land/sea mask variable apply_landsea_mask = FALSE //apply land/sea mask on meteorological fields keep_mean_pressure = FALSE //some comments keep_mean_wind = TRUE //some comments time_interpolation = LINEAR //some comments bulk_formula = CLASSIC //some comments inversebarometer = FALSE //will use IB in open boundaries conditions verbose_level = MINIMAL //some comments ## #OceanWaves OceanWaves_flag = FALSE //some comments ProfileParameterisation = LINEAR //w vertical profile parameterisation for non-hydrostatic shallow-water AiryPeriod = 10. //surface wave period for non-hydrostatic, time-stepping shallow-water EnforceContinuity = FALSE //enforce continuity equation weight in GWE formulation EnforceDryingLock = FALSE //enforce drying lock WaveBreakingFormulation = NONE //surface wave breaking parameterisation formulation FroudeCoefficient = 1.+01 //scaling coefficient for Froude diffusion OceanWavesForcing_flag = FALSE //some comments parameterisation = MAC-WILLIAMS //some comments drag_flag = FALSE //some comments friction_flag = FALSE //some comments time_interpolation = LINEAR //some comments discretisation = UNSTRUCTURED //some comments file_directory = NONE //some comments file_format = WW3_SG_NETCDF //input format of ocean waves forcing file_convention = NONE //some comments MaskFile = NONE //some comments ## #boundaries type = 1 //clamped:1, Flather:2, Orlanski:3, delayed_Flather:7, all others:crash mode = LOCAL //some comments relax_time = 2.0 //some comments archived_BC_use = FALSE //some comments archived_BC_directory = NONE //some comments archived_BC_format = BINARY //some comments archived_BC_input-settings = file=ROOTNAME.YYYY.MM.nc ssh=XXX u=XXX v=XXX mode=UNSTRUCTURED //archived_BC input file settings archived_BC_offset = NONE //archived_BC elevation offset (to be added to prescribed BC values) archived_BC_units = MKS //some comments archived_BC_transport = u //some comments CirculationOBCs_flag = FALSE //some comments CirculationOBCs_directory = NONE //some comments CirculationOBCs_format = NETCDF //some comments CirculationOBCs_input-settings = file=ROOTNAME.YYYY.MM.nc ssh=XXX u=XXX v=XXX mode=UNSTRUCTURED //archived_BC input file settings CirculationOBCs_offset = NONE //archived_BC elevation offset (to be added to prescribed BC values) CirculationOBCs_units = MKS //some comments CirculationOBCs_transport = u //some comments PermanentTide_Flag = FALSE //add permanent tide (OBCs and tide potential) periodic_conditions_file = NONE //contains instructions for boundary condition periodicity sponge_flag = FALSE //some comments PML_factor = 0.0 //attenuation factor in PML absorbing zone RelaxationFlag = FALSE //activate/inhibate relaxation in buffer zone RelaxationTimeScale = 0.0 //relaxation time scale for relaxation buffer zone RelaxationLengthScale = 0.0 //relaxation length scale for relaxation buffer zone LinearityFlag = FALSE //activate/inhibate model linearity in buffer zone LinearityLengthScale = 0.0 //linearity length scale for radiative buffer zone buffer_zone_file = NONE //contains instructions for open boundaries buffers rivers_flag = FALSE //some comments rivers_file = rivers.dat //some comments solid_boundary_condition = FREE-SLIP //some comments no_slip_size = 100.0 //some comments ## #ice ice_dynamic_flag = FALSE //some comments ice_cover_file = NONE //some comments ice_elasticity_file = NONE //some comments TimeStep = 60 //some comments MomentumSolver = 1 //some comments Rheology = 1 //some comments ice_friction_flag = FALSE //some comments ice_polygons_file = NONE //ice limits polygons (free format) ice_polygons_data = NONE //ice polygons data ice_shelves_raster = NONE //ice shleves cover raster ice_concentration = NONE //ice concentration ice_concentration_threshold = 0.5 //ice concentraton threshold ice_confinement_modulation = NONE //ice confinement modulation ice_shelves_friction_type = QUADRATIC //some comments sea_ice_friction_type = LINEAR //some comments ice_linear_friction_coefficient = 2.5e-3 //default linear bottom friction coefficient (r) ice_karman_rugosity = 1.0e-4 //some comments ice_quadratic_friction_coefficient = 2.5e-3 //default quadratic bottom friction coefficient (Cd) ice_shelves_multiplicator = 2.0 //friction factor applied below ice shelves ice_friction_smoother = LEGACY //some comments ice_smoother_niterations = 50 //some comments ## #topography OnOffFlag = FALSE //some comments bottom_motion_flag = FALSE //some comments bottom_motion_directory = NONE //some comments bottom_motion_file_convention = NONE //some comments topo_file = NONE //bathymetry file slope_file = NONE //bathymetry gradient's file zmin_file = NONE //minimum elevation file relative_minimum_depth = 5.0 //minimum depth relative to minimum elevation minimum_depth = 10.0 //overall minimum depth in model bathymetry minimum_depth_polygons = NONE //minimum depth polygon file minimum_depth_values = NONE //minimum depth data file depth_offset = 0.0 //overall depth offset depth_offset_polygons = NONE //depth offset polygon file depth_offset_values = NONE //depth offset data file mean_level_file = NONE //mean dynamic topography mean_level_offset = TRUE //apply mean dynamic topography offset to depths depth_scale_factor = 1.0 //depth scale factor depth_scale_polygons = NONE //depth scale polygons file depth_scale_values = NONE //depth scale data file distance_to_coast = NONE //distance-to-coast file drying_minimum_depth = 0.10 //numerical minimum depth set at dry nodes drying_threshold = 0.0 //depth threshold to select dry nodes drying_minimum_layer_depth = AUTO //numerical minimum layer depth set at dry nodes ## #miscellaneous non_tidal_loading_flag = FALSE //some comments checks = FALSE //some comments Check_Wconsistency = FALSE //some comments CompatibilityScale = 1.0 //some comments 2D_3D_coupling = TRUE //some comments SmoothZField = FALSE //some comments SmoothUField = FALSE //some comments SmoothAdvection = FALSE //some comments SmoothDiffusion = FALSE //some comments flush_tracking = FALSE //some comments time_echoing_interval = 10 //echo time every N time steps echoing_scope = MASTER-CPU //some comments dump_crash_files = FALSE //dump crash files on failure exit print_spectral2D_matrix = FALSE //some comments print_spectral3D_matrix = FALSE //some comments spectral2D_solving_verbose = FALSE //some comments spectral3D_solving_verbose = FALSE //some comments toponyms_file = NONE //ocean partition codes ## #stability Stability_Check = TRUE //unstability check Stability_Control = DYNAMIC //unstability processing mode Stability_MindZdT = 1.e-04 //minimum elevation time derivative for 2D stability control (subcycling) Stability_Start = 0 //stability checks start latency Max_Delta_Elevation = 4.0 //some comments Max_Delta_Currents = 4.0 //some comments Max_Delta_Period = 3600. //some comments maximum_admissible_elevation = 20.0 //some comments persistence = 6. //persistence duration of previously unstable node in subcycling SubcyclingTemporization = 10 //max successive subcyling reprocessing SubcyclingExtension = 5 //minimum neighbour band between subcyle mesh limits SubcyclingLockLimit = 5 //if node get unstable more than lock limit time, stay infinitely at its highest subcycling level SubcyclingCFLratio = 2 //to compare CFL and dT/ratio CFL_min_depth = 4. //some comments CFL_depth_offset = 0. //some comments CFL_velocity = 0. //some comments ArchiveSubcyclingMesh = FALSE //archive MPI partition mesh ArchiveSubcyclingLevels = NONE //subcycling levels archive ReloadSubcyclingLevels = NONE //subcycling levels reload ## #fe_archive % if no line follow the fe archives use only defaults values OnOffFlag = FALSE //some comments state_file = tugo-state //some comments separate_mesh_file = NONE //use a separate file for mesh and discretisation base data archive archive_format = NETCDF //some comments archive_convention = YYYY.MM //some comments archive_start = 0.0 //some comments archive_interval = 10800.0 //some comments overwrite_append_flag = APPEND //some comments archive_max_precision = 8 //bytes: int2 (2) not yet implemented; single precision(4); double precision(8) mask_dried = TRUE //mask dried nodes/elements in archive vector_file = tugo-forcing //some comments archive_bits = 2 //some comments archive_huvscale = 100 100 100 //some comments archive_pWsxWsy_scale = 1000 1000 1000 //some comments surface_elevation = TRUE //some comments water_depth = FALSE //some comments barotropic_currents = TRUE //some comments mean_surface_elevation = FALSE //some comments mean_barotropic_currents = FALSE //some comments surface_elevation_extrema = FALSE //some comments mean_kinetic_energy2D = FALSE //some comments horizontal_diffusion2D = FALSE //some comments horizontal_advection2D = FALSE //some comments transport2D = FALSE //some comments divergence2D = FALSE //some comments friction_coefficient = FALSE //some comments CFL2D = FALSE //some comments cycles = FALSE //some comments unstables = FALSE //some comments horizontal_currents = TRUE //some comments vertical_velocity = TRUE //some comments temperature = FALSE //some comments salinity = FALSE //some comments density = FALSE //some comments horizontal_diffusion = FALSE //some comments horizontal_advection = FALSE //some comments lateral_mixing = FALSE //some comments IB-departure = FALSE //some comments atmospheric_surface_pressure = FALSE //some comments wind_stress = FALSE //some comments wind_stress_divergence = FALSE //some comments tidal_forcing = FALSE //some comments radiation_stress = FALSE //some comments gradSxx = FALSE //some comments ice_parameters = FALSE //some comments verbose_level = MINIMAL //some comments ## #structured_archive OnOffFlag = FALSE //some comments zone = AUTO //define structured grid overwrite_append_flag = APPEND //some comments archive_convention = YYYY.MM //some comments start = 0.0 //some comments interval = 10800.0 //some comments archive_max_precision = 4 //bytes: int2 (2) not yet implemented; single precision(4); double precision(8) surface_elevation = TRUE //some comments barotropic_currents = TRUE //some comments horizontal_diffusion2D = FALSE //some comments horizontal_advection2D = FALSE //some comments transport2D = FALSE //some comments divergence2D = FALSE //some comments surface_elevation_extrema = FALSE //some comments mean_kinetic_energy2D = FALSE //some comments friction_coefficient = FALSE //some comments IB-departure = FALSE //some comments atmospheric_surface_pressure = FALSE //some comments wind_stress = FALSE //some comments horizontal_currents = TRUE //some comments vertical_velocity = TRUE //some comments temperature = FALSE //some comments salinity = FALSE //some comments density = FALSE //some comments horizontal_diffusion = FALSE //some comments horizontal_advection = FALSE //some comments pressure_gradient = FALSE //some comments lateral_mixing = FALSE //some comments tracer_2d = FALSE //some comments radiation_stress = FALSE //some comments verbose_level = MINIMAL //some comments ## #sample_points % if no line follow the sample points use only defaults values OnOffFlag = FALSE //some comments file = tugoPlot.input //some comments start = 0.0 //some comments save_interval = 1800 //some comments overwright_append_flag = APPEND //some comments SectionOnOffFlag = FALSE //some comments SectionInputFile = NONE //some comments SectionStart = 0.0 //some comments SectionSaveInterval = 1800 //some comments SectionOverAppendFlag = APPEND //some comments SectionTerminalEchoing = FALSE //some comments ## #analysis % if no line follow the harmonic analysis use only defaults values OnOffFlag = FALSE //some comments list_file = NONE //some comments auto_completion = TRUE //if list file not given, do spectrum auto-completion harmonic_start = 2*#MODEL.$spinup./3600/24.0 //time after which analysis starts, in days. Must be longer than spinup sample_interval = 1800 //some comments compute_interval = 365 //some comments rayleigh_factor = 0.5 //Rayleigh criterion = (1 cycle difference over acquisition time span) x threshold admittance_method = SPLINE //admiiatnce method appicable for harmonic analysis strategy = FULL //some comments sequential_recycle = MANAGED //recycle sequential solutions for tidal OBCs sequential_archive_level = STANDARD //sequential solutions archive content LGP1ArchiveFlag = FALSE //create a LGP1xLGP1 ASCII archive for compatibility purposes ASCIIArchiveFlag = FALSE //create a ASCII UG archive (on computational discretisation) NETCDFArchiveFlag = TRUE //create a netcdf UG archive (on computational discretisation) SGFlag = FALSE //some comments zone = AUTO //define strucured grid surface_elevation = TRUE //some comments horizontal_currents = TRUE //some comments LSA_potential = TRUE //some comments ## #diagnostics % if no line follow the harmonic analysis use only defaults values StatisticsFlag = FALSE //some comments StatisticsAverage = FALSE //performs average processing StatisticsMinmax = FALSE //performs min/max processing StatisticsCollectionStart = 2*#MODEL.$spinup./3600/24.0 //some comments StatisticsCollectionInterval = 12 //some comments StatisticsCollectionTics = 600 //some comments StatisticsCollectionDuration = 12 //some comments DiagnosticsSetting = id=NONE active=FALSE start=0 interval=12 tics=600 duration=12 //runtime diagnostics setting DiagnosticsSetting = id=NONE active=FALSE start=0 interval=12 tics=600 duration=12 //runtime diagnostics setting DiagnosticsSetting = id=NONE active=FALSE start=0 interval=12 tics=600 duration=12 //runtime diagnostics setting DiagnosticsSetting = id=NONE active=FALSE start=0 interval=12 tics=600 duration=12 //runtime diagnostics setting DiagnosticsSetting = id=NONE active=FALSE start=0 interval=12 tics=600 duration=12 //runtime diagnostics setting DiagnosticsSetting = id=NONE active=FALSE start=0 interval=12 tics=600 duration=12 //runtime diagnostics setting DiagnosticsSetting = id=NONE active=FALSE start=0 interval=12 tics=600 duration=12 //runtime diagnostics setting DiagnosticsSetting = id=NONE active=FALSE start=0 interval=12 tics=600 duration=12 //runtime diagnostics setting DiagnosticsSetting = id=NONE active=FALSE start=0 interval=12 tics=600 duration=12 //runtime diagnostics setting DiagnosticsSetting = id=NONE active=FALSE start=0 interval=12 tics=600 duration=12 //runtime diagnostics setting StatisticsFileConvention = diagnostics-YYYY.MM.nc //filename template for diagnostics archiving ## #energy_budget % if no line follow the energy budget use only defualts values OnOffFlag = FALSE //some comments start = 0.0 //some comments interval = 1800 //some comments time_step_energy_budget = FALSE //some comments harmonic_energy_budget = FALSE //some comments harmonic_energy_budget_by_regions = NONE //some comments LGP1ArchiveASCII = FALSE //create a LGP1 ASCII archive for compatibility purposes resonance_exploration = FALSE //some comments resonance_frequencies = NONE //some comments ## #tracers % if no line follow the energy budget module use only defaults values tracers_computation = FALSE //some comments start = 0.0 //some comments interval = 1800 //some comments time_integration = LEAPFROG //some comments input_file = tracers.dat //some comments initialisation_file = NONE //some comments horizontal_diffusion_mode = DEFAULT //some comments horizontal_diffusion_coefficient = 0.0 //some comments smagorinsky_coefficient = 2.8 //some comments upwind_coefficient = 0.1 //some comments ## #drifters2D % if no line follow the tracers module use only defaults values drifters2D_computation = FALSE //some comments start = 0.0 //some comments interval = 1800 //some comments input_file = drifters2D.dat //some comments ## #dynamics2D % if no line follow the 3D module use only defaults values WaveEquationForm = GWE-CLX //continuity equation type Continuity2D_integration = FORWARD //continuity time scheme Momentum2D_integration = FORWARD //momentum time scheme Momentum2D_mode = VELOCITY //velocity/transport option in model state variables Advection2D_mode = NON-CONSERVATIVE //some comments AdvectionDiffusion_discretisation = NODE-WISE //some comments SLV_discretisation = LGP1-CG //elevation/pressure/tracer discretisation v2D_discretisation = LGP1-CG //velocity discretisation G2D_discretisation = INTRINSIC //pressure gradient discretisation wave_scalar_prouct = QUADRATURE //type of scalar product in wave equation discretization wave_equation_stencil = IMPLICIT //type of prssure gradient stencil in wave equation tau_0 = 2e-4 //weight of CE in GWE (more by clicking...) theta = 0.75 //implicit/explicit coefficient (more by clicking...) barotropic_w = FALSE //compute vertical velocity checks horizontal_viscosity_mode = SMAGORINSKY //horizontal diffusion upwind_coefficient = 0.1 //upwind in diffusion computation(more by clicking...) AsselinFilteringH = FALSE //Asselin coefficient for elevation (Leapfrog) AsselinFilteringU = TRUE //Asselin coefficient for velocity (Leapfrog) AsselinCoefficientC1 = 0.1 // (1-c)*Xn + 1/2*c(Xn-1 + Xn+1) ## #dynamics3D % if no line follow the 3D module use only defaults values 3D_computation = FALSE //some comments 3D_time_step = $2D_time_step //some comments Momentum_integration = LEAPFROG //some comments 3D_mode = BAROCLINIC //some comments pressure_mode = HYDROSTATIC //some comments w_derivation = DIRECT //some comments v_discretisation = DGP1 //horizontal velocity discretisation w_discretisation = LGP1xLGP1 //vertical velocity discretisation, (horizontal)x(vertical) p_horizontal_discretisation = LGP1 //some comments p_vertical_discretisation = LGP1 //some comments max_number_layers = 20 //some comments number_of_upper_horizontal_layers = 0 //some comments limit_of_upper_horizontal_layers = -50 //some comments level_distribution = UNIFORM //some comments level_displacement = SURFACE-ONLY //some comments level_optimisation = NONE //some comments turbulence_closure = CONSTANT //some comments lateral_diffusion_coefficient = 0.0 //some comments vertical_diffusion_coefficient = 1.e-04 //some comments ## #tracers3D % if no line follow the tracers3D module use only defaults values 3D_computation = TRUE //some comments Tracers_integration = FORWARD //some comments tracers_mode = DIAGNOSTIC //some comments tracers_discretisation = LGP0 //some comments tracers_vertical_discretisation = DGP1 //some comments tracers_vertical_resolution = 1 //some comments tracers_advection_centering = 0.5 //some comments tracer_initialisation = HOMOGENEOUS //some comments initialisation_files_directory = NONE //some comments temperature_initialisation_file = NONE //some comments temperature_variable = AUTO //name of temperature variable salinity_initialisation_file = NONE //some comments salinity_variable = AUTO //name of salinity variable density_initialisation_file = NONE //some comments density_variable = AUTO //name of density variable tracer_profile_file = NONE //some comments tracers_initialisation = VARIATIONAL //some comments tracers_lateral_diffusion_coefficient = 0.0 //some comments tracers_horizontal_diffusion_coefficient = 0.0 //some comments tracer_vertical_diffusion_coefficient = 1.e-04 //some comments tracers_Hsmoothing = FALSE //some comments compute_diagnostics = FALSE //some comments ## #streamf % if no line follow the tracers module use only defaults values stream_function_computation = FALSE //some comments compute_interval = 1800 //some comments ## #constraints % if no line follow the tracers module use only defaults values use_internal_specifications = FALSE //some comments constraint_method = CLAMPED //some comments elevation_constraint_file = NONE //elevation constraints (clamped or nudging) instruction file constraint_start = 0 //some comments relaxation_time_scale = 300 //time scale setting for nudging relaxation_length_scale = 1000 //length scale setting for nudging relaxation_extent = 1000 //extent length setting for nudging max_data_gap = 600 //some comments apply_spatial_gradient = TRUE //some comments echoing_file_template = NONE //if not NONE, will echo model values at constraint locations in files with name following template echoing_interval = 300 //echoing time sampling ## #sediment % if no line follow the tracers module use only defaults values fluid_mud_flag = FALSE //some comments fluid_mud_friction_coefficient = 1.18e-5 //some comments fluid_mud_polygons = NONE //some comments fluid_mud_polygons_data = NONE //some comments fluid_mud_raster = NONE //some comments fluid_mud_smoother = QUICK //some comments fluid_mud_niterations = 10 //some comments ## ```